Working process of mechanical cotton picking

The walking speed of the cotton picker should be adjusted in time according to the height, density and ground conditions of the cotton, generally controlled at 2.5-3.5 mph. When encountering low cotton, the operating speed should be slowed down, and the speed should not exceed 2.4 mph. If the speed is too fast, it is easy to miss the harvest. Stop the machine in time when it breaks down, and separate the cotton picking head when reversing, otherwise the picking head will be reversed and damage the parts. Troubleshoot the transmission part, which should be done when the flame is turned off. Non-workers are prohibited from coming up to the cotton machine. The mining machine must be equipped with more than four effective dry powder fire extinguishers.

When unloading the cotton, the cotton picker should be carried out on flat ground. It is strictly forbidden to walk when unloading the cotton, avoid the electric wires in the air and the parts that hinder safety, and the cotton should be unloaded at the downwind vent when there is wind. When unloading the cotton, follow the instructions. During the operation of the cotton picker, the driver should strictly follow the requirements of the user manual to clean up the impurities and dust in the cotton picker, the dustproof system inside and outside the machine.

Factroy


Post time: Nov-20-2020